Part Names And Functions - Omron ZJ-SD Series User Manual

Part Names and Functions

Amplifier Unit
Display
Section (*)
(1) Input Cable
(*) Operating and Display Sections
(1) The input cable connects the Sensor Head.
(2) The current/voltage switch selects either current output or voltage output.
Monitor focus must also be set when switching the output.
(3) The connectors connect the Calculating and Interface Units.
(4) The output cable connects the sensor to the power supply and external devices,
such as sync sensors or programmable controllers.
(5) The power indicator lights when the Sensor is powered ON.
(6) The Zero Reset indicator lights when the zero reset function is enabled.
(7) The ENABLE indicator lights when the sensor is ready for measurement. It goes off
when measurement is not possible (e.g. when the measuring range is exceeded, or
when the Sensor Head is not connected when the power is turned ON).
(8) The OPE1 indicator lights according to the judgment result or warning state.
(9) The OPE2 indicator lights according to the judgment result or warning state.
(10)The OPE3 indicator lights according to the judgment result or warning state.
(11)The main display shows measured values and function names.
(12)The sub-display shows additional information and function setting values for
measurements.
(13)The threshold switch selects whether to set (and display) the HIGH or LOW threshold.
(14)The mode switch selects the operating mode.
(15)The Control Keys set measurement conditions and make other settings.
Operations p.30
Operating Section (*)
(3) Connector (two connectors, one on each side)
(2) Current/voltage switch (on rear side)
(8) OPE1 indicator
(9) OPE2 indicator
(10) OPE3 indicator
(11) Main Display
(12) Sub-display
Current/voltage switch
Reading Displays p.29
Part Names and Functions
(4) Output Cable
(5) Power supply indicator
(6) Zero Reset indicator
(7)ENABLE indicator
POWER
POWER
kV
kV
(14) Mode switch
(13) Threshold switch
Voltage output
Current output
Switching Modes p.28
Section 2
(15) Control Keys
p.70
p.10
p.10
p.10
Key
ZJ-SD
User's Manual
9