Omron ZJ-SD Series User Manual page 74

Section 5
Using the Hold Functions
5.
Use the LEFT or RIGHT key to display
[H-LVH] on the main display.
H-LVH is not displayed if timing input [TIMNG] is set as
the trigger.
6.
Press the UP or DOWN key.
The leftmost digit of the sub-display flashes.
7.
Use the cursor keys to set the desired
self-trigger level.
8.
Press the ENT key to confirm the setting.
This registers the trigger level.
9.
Use the LEFT or RIGHT key to display
[H-LVL] on the main display.
H-LVL is not displayed if timing input [TIMNG] is set as
the trigger.
10.
Press the UP or DOWN key.
The leftmost digit of the sub-display flashes.
11.
Use the cursor keys to set the desired self-
trigger level.
12.
Press the ENT key to confirm the setting.
This registers the trigger level.
ZJ-SD
60
User's Manual
Moves from one digit to
another.
Changes the numeric value.
Moves from one digit to
another.
Changes the numeric value.