Omron ZJ-SD Series User Manual page 109

Adjusting Display Brightness (ECO Display)
When the ECO display function is used, the digital displays darken, reducing current
consumption.
Moving to FUN and SPCL
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT keys to display
[SPCL] on the main display.
Moving to ECO
3.
Press the UP or DOWN key.
The sub-display flashes.
4.
Use the UP and DOWN keys to display
[DISP] or [ALL].
5.
Press the ENT key.
6.
Use the LEFT and RIGHT keys to display
[ECO] on the main display.
Selecting whether or not to use the ECO display function
7.
Press the UP or DOWN key.
The sub-display flashes.
8.
Select either [OFF] or [ON].
OFF: Normal display (default)
ON: ECO display
9.
Press the ENT key to confirm the setting.
This registers the setting.
When [ON] is selected, the display darkens.
Adjusting Display Brightness (ECO Display)
Section 6
ZJ-SD
95
User's Manual