Table of Contents
Advertisement
Initializing Setting Data
Initialization resets the settings of all banks or the currently selected bank to their default
values.
• There are two [INIT] options, [ALL] and [NOW].
[ALL]: This initializes all banks (0 to 3).
[NOW]: This initializes the currently selected bank.
• After bank(s) are initialized, the currently selected bank never switches to bank 0.
Default Value
Function
Measurement mode
Number of samples to
average
Hysteresis width
Distance measurement mode User
Sensor distance value
Area correction
Hold
Timer
Special function
Scaling
Monitor focus
Linear output correction
Display reverse
ECO display function
Display digit limit
Non-measurement settings
Zero reset memory
HIGH threshold
LOW threshold
Differentiation function
Zero reset function
Sub-display
Output type
Warning level
Standard
When connected to the static electricity sensor head (ZJ-SD100): 64 times
0.1 kV
10 mm
OFF
OFF
OFF
CLOSE
OFF
Minimum value inside rated measuring range: -4 V (at voltage output),
Maximum value inside rated measuring range:+4 V (at voltage output),
No correction
OFF
OFF
5 digits (all)
KEEP
ON
Maximum display value
Minimum display value
OFF
Canceled
Threshold
Standard
Maximum display value
Initializing Setting Data
Default Value
4 mA (at current output)
20 mA (at current output)
Section 6
ZJ-SD
97
User's Manual
Advertisement
Table of Contents
