Table of Contents
Advertisement
Section 6
Initializing Setting Data
Moving to the FUN mode and INIT
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT keys to display
[INIT] on the main display.
Selecting initialization of all banks/initialization of currently selected bank
3.
Press the UP or DOWN key.
The sub-display flashes.
4.
Select [ALL] or [NOW].
ALL: Initializes all banks.
NOW: Initializes only the currently selected bank.
5.
Press the ENT key.
6.
Press and hold down the ENT Key.
The sub-display indicates [-----].
7.
Release the ENT key once [OK] is displayed
on the sub-display.
This initializes all settings.
ZJ-SD
98
User's Manual
Advertisement
Table of Contents
