Xerox WorkCentre 3025BI Service Manual page 126

4. Select the [Status] tab then, [Current Settings, Print Information] to access:
• Machine Information
• Security Information
• Print Information and Reports:
– Configuration
– Network Configuration
– Supplies Info
– Usage Counters
Refer to the following sections of the WorkCentre® 3025BI/NI User Guide for:
• Information on machine reporting and configuration using the Control Panel and Centre-
Ware Internet Services (CWIS) including:
• Section 6 Maintenance: Checking the Status of Consumables.
• Section 7 Troubleshooting, Machine Status Indicators, for:
– LED color and status descriptions
– Printing machine reports
General Procedures and Information
GP 2, GP 3
GP 3 Machine Counters
Purpose
Use this procedure to access the Machine Counters.
NOTE: If frequent paper jams or printing problems are occurring, check the number of pages
the machine has printed or scanned. Replace worn parts as needed.
Procedure
From the Control Panel:
1. Press the <Information> button
2. Use the up/down arrows to scroll to <Info Pages>, then press the <OK> button.
3. Scroll to <Usage Counter> then press the <OK> button to print a Usage Counter report.
or
1. Enter Diagnostics Mode, select <Diagnostics> then press the <OK> button
2. Use the up/down arrows to select <Report>, then press <OK>.
3. Use the up/down arrows to select <Usage Counter>, then press <OK>, then <OK> again
to print a Usage Counter report.
June 2014
6-14 Xerox® WorkCentre® 3025 Multifunction Printer Service Manual