FarmTek FodderPro Manual page 21

Attach Gauge and Regulator to Manifold Trunk
8b
ATTACH GAUGE & REGULATOR TO MANIFOLD TRUNKS
Complete these steps:
1. Wrap the threads of the fitting at the end of the manifold trunk with thread tape.
2. Attach a gauge and regulator assembly to the manifold trunk. Tighten until snug.
3. Repeat steps to attach all remaining gauge and regulator assemblies to the remaining manifold trunks.
STYLE 1 STYLE 2
(FPT1H105) (FPT2H105)
Revision date: 09.21.18 112712 21