FarmTek FodderPro Manual page 14

6
INSTALL GUTTERS
Gutters are installed at the drain/low side of each frame pod. There are three (3) different gutter types for this fodder system.
Each has a specific position on the frame. Each is designed to drain toward the downspout when installed correctly. Diagram
below shows the downspout locations and identifies where to install each gutter type.
Required parts:
• FGS01L06325F Gutter (A Pods)
• FGS01R06325F Gutter (B Pods)
• FGS01L07925F Gutter (Pod C)
• 112838 #10 x 1" Tek Screws
• 100442 Tek Screw Driver
14
14
Install Gutters
Downspout
A
Downspout
B
Supply Manifold Side
of Fodder System
A
Downspout
B
112712
ATTENTION: Install gutters before
installing the downspouts.
C
Revision date: 09.21.18