FarmTek FodderPro Manual page 20

8a
ASSEMBLE GAUGE AND REGULATOR
Complete this procedure to assemble the gauge and regulator portion of the supply manifolds. Use Diagram A to complete the assembly.
Wrap all threaded fittings (4-5 times) with WR1095 tape before assembly. Wrap threads in a direction the will not allow the tape to unwind
when fittings are assembled. There are seven (7) assemblies.
DIAGRAM A
WF1330
WF2372
IMPORTANT: Install the WR1220 solenoid so the arrow points in
the direction the water flows.
See Procedure 11 to adjust and set the water pressure.
20
20
Assemble Gauge and Regulator
WR1220
WF2392
WR4067
WG3840
WF2350
WR1095
112712 Revision date: 09.21.18