Sokkia iM-50 Series Operator's Manual page 112

4. Input radius for the first circle "R1" and press [OK].
5. Input coordinates for the second center point and radius for
the second circle ("Center2" and "R2").
 steps 3 to 4
6. 2 converging circles can produce 2 intersections. To switch
between result screens, press {}/{}.
Press [OK] to return to the screen in step 3 and continue
measurement as necessary.
• To quit measurement, press {ESC} in the screen of step 3.

• Radius input range: 0.000 to 999999.999 (m)
23.1.5 Extend
This function calculates the coordinates of a point extending along a defined straight line but beyond the
defined end point.
1. In the second page of OBS screen, press [MENU], then
select "Intersect.".
2. Select "Extend".
3. Input coordinates for the first point and press [OK].
• When [LOAD] is pressed, registered coordinates can be
recalled and used.
"13.1 Entering Instrument Station Data and Azimuth
Angle"
• Press [MEAS] to begin measurement.
3: Dist
1: Coordinates of Pt.1
2: R 1
N
E
REC
Intersection
(Extend point)
2: Coordinates of Pt.2
E xt end
D i vi de
P i t ch
E D M
1: P t. 1
N 1:
E1:
LOAD
107
23. INTERSECTIONS
100. 000 m
P1
OK
2Ci r cl e
345. 678
-876. 543
P1
1/ 2
S-O OK
0.000
0. 000
P1
MEAS
OK