Selecting T Type/S Type - Sokkia iM-50 Series Operator's Manual


• When using a USB memory with 4 metal terminals on the surface, insert it with the terminal facing backwards
to avoid damaging the USB port.
PROCEDURE Removing USB Flash Drive
1. Remove the USB flash drive from the USB port.
2. Close the external interface hatch until a click is heard.

• It is recommended that you remove the USB flash drive after you finish inputting/outputting data and then
return to the USB mode Menu.
If you remove the USB flash drive before returning to the above menus, the following display may be
displayed when you insert it to your PC. Select "Scan and fix" to avoid this screen is displayed again.
• Removing the USB flash drive before returning to the above menus itself will never damage the measurement
data in the memory.

32.2 Selecting T type/S type

1. Press [USB] on the status screen.
2. Select "T type" or "S type".
Press [ENT] after selection.

• Select either "T type" or "S type" according to the
communication format used.
"9. CONNECTING TO EXTERNAL DEVICES"
USB
Save data
Load known PT
Save code
Load code
File status
USB mode menu
174
32. USING USB FLASH DRIVE
USB
T type
S type