Table of Contents
Advertisement
2. Select the point name to be displayed in detail and press
[ENT].
Details of the data are displayed. This screen contains
distance measurement data.
• To display previous data item, press [PREV].
• To display next data, press [NEXT].
• Press [EDIT] to edit code/target height/point name of the
selected point name. Items that can be edited depend on
the type of data selected.
Press [OK] to confirm changes and return to the previous
screen.
• [
] = Use {
}/{
...P
• [...P] = Use {
}/{
• Press [FIRST] to display first data.
• Press [LAST] to display last data.
• Press [SRCH] to search for point name. Input the point
name after "PT".
The search may take time if many data are registered.
• Press [RED] to display the reduced data screen shown at
right.
Press [OBS] to return to the previous screen.
3. Press {ESC} to conclude detailed display and restore the
list of points.
Press {ESC} again to restore <TOPO>.
• If more than two points with the same point name exist in the current JOB, iM finds the newer data only.
} to move from page to page.
} to select individual point.
28. RECORDING DATA - TOPO MENU -
SD
ZA
HA-R
HR
PT 1 0 1 0
NEXT
HD
VD
Azmth
HR
PT
1 0 1 0
NEXT
160
1 2 3 . 4 5 6 m
2 0 3 1 2 1
11 7
3 2 2 1
1 2 3 . 4 5 6 m
PREV
EDIT
RED
1 2 3 4 . 4 5 6 m
- 3 2 1 . 1 2 3 m
1 2 3 4 5 6
1 2 3 . 4 5 m
PREV
EDIT
OBS
Advertisement
Table of Contents
