2. Select "Deletion" to display the list of known point data.
3. Select the point name to be deleted and press {ENT}.
• [
] = Use {
}/{
...P
• [...P] = Use {
}/{
• Press [FIRST] to display top of point name list.
• Press [LAST] to display end of point name list.
• [SRCH]
"13.1 Entering Instrument Station Data and Azimuth
Angle PROCEDURE Coordinate Data Search
(Complete match) / PROCEDURE Coordinate Data
Search (Partial match)"
4. Press [DEL] to delete the selected point name.
• Press [PREV] to display previous data.
• Press [NEXT] to display next data.
5. Press {ESC} to quit the point name list and return to
<Known data>.
PROCEDURE Clearing all coordinate data at once (initialization)
1. Select "Known data" in Data Mode.
2. Select "Clear" and press {ENT}.
3. Press [YES].
<Known data> is restored.
} to move from page to page.
} to select individual point.
30. REGISTERING/DELETING DATA
Known data
Job.JOB1
Key in coord
Comms input
Deletion
View
PT
PT
PT
PT
PT
PT
Clear
Comms setup
167
012
013
POINT01
ABCDEF
123456789
FIRST
LAST
SRCH