Sokkia iM-50 Series Operator's Manual page 2

HOW TO READ THIS MANUAL
Thank you for selecting the iM-50 series.
• Please read this Operator's manual carefully, before using this product.
• iM has a function to output data to a connected host computer. Command operations from a host computer
can also be performed. For details, refer to "Communication manual" and ask your local dealer.
• The specifications and general appearance of the instrument are subject to change without prior notice and
without obligation by TOPCON CORPORATION and may differ from those appearing in this manual.
• The content of this manual is subject to change without notice.
• Some of the diagrams shown in this manual may be simplified for easier understanding.
• Always keep this manual in a convenient location and read it when necessary.
• This manual is protected by copyright and all rights are reserved by TOPCON CORPORATION.
• Except as permitted by Copyright law, this manual may not be copied, and no part of this manual may be
reproduced in any form or by any means.
• This manual may not be modified, adapted or otherwise used for the production of derivative works.
Symbols
The following conventions are used in this manual.

: Indicates precautions and important items which should be read before operations.

: Indicates the chapter title to refer to for additional information.

: Indicates supplementary explanation.

: Indicates an explanation for a particular term or operation.
etc. : Indicates Operation icons on the display and window dialog buttons.
[MEAS]
etc. : Indicates keys on the operation panel.
{ESC}
<Screen title> etc.: Indicates screen titles.
Notes regarding manual style
• Except where stated, "iM" means iM-50 series in this manual.
• Except where stated, instrument with display on both sides is used for illustration.
• Screens appearing in this manual are based on the setting "Dist. reso: 1 mm". When "Dist. reso: 0.1 mm" is
selected, the number of decimal places for distance and atmospheric condition input values will be increased
by one.

"33. CHANGING THE SETTINGS"
• Location of Operation icons in screens used in procedures is based on the factory setting. It is possible to
change the allocation of Operation icons.

"33. CHANGING THE SETTINGS"
• Learn basic operations in "4. PRODUCT OUTLINE" and "5. BASIC OPERATION" before you read each
measurement procedure. For selecting options and inputting figures, see "5.1 Basic Key Operation".
• Measurement procedures are based on continuous measurement. Some information about procedures when
other measurement options are selected can be found in "Note" ().
• KODAK is a registered trademark of Eastman Kodak Company.
®
• Bluetooth is a registered trademark of Bluetooth SIG, Inc.
• All other company and product names featured in this manual are trademarks or registered trademarks of
each respective organization.
S Li-ion
Li-ion
This is the mark of the Japan Surveying Instruments Manufacturers Association.
i