Chapter 3
Installing Software & Setting Networking Configurables
To set the General parameters of the ANG-3000/7000, perform the following
steps:
Aurorean Installation & Service Guide
Configuring General Values of the ANG-3000/7000 with APM
1
Click on the General main menu option.
The General Configuration Window appears as shown in Figure 41.
Figure 41 Aurorean Policy Manager General Configuration Window
2
Enter the name that will be shared by all Aurorean devices on your
corporate network in the VPN Domain Name field.
For best results, we recommend that you enter a name ending in
"VPN" (for example, ACMEVPN). This name should be different
from any Windows NT domain or Novell Directory Service (NDS)
names already in use on your network to prevent confusion. Do not
enter spaces or punctuation marks in this field.