Ang-1000 - Enterasys ANG-1000 Installation & Service Manual

Category
Environment: Ambient
ANG/APS- Temperature
3000/7000
Relative Humidity
Acoustic Noise
Environment: Operating

ANG-1000

Temperature
PFC Power AC Voltage &
Supply: Frequency
APS/ANG-
DC Power Supply
3000/7000
+5VDC
+12VDC
+3.3VDC
-12VS\DC
PFC Power Output: 5 vVDC,
Supply: ANG- 2.5A
1000
Safety US/Canada
Regulations
Europe CE Mark
APS/ANG-
3000/7000
International
Table 1 Common Specifications (Continued)
Parameters
Operating: 40° to 104° F (10° to 35° C) to 5,000 ft,
- De-rated 1°C/1000 to 10,000 ft
- Maximum rate of change of 10 °C per hour
Non-operating: -40° to 167° F (-40° to 70° C ambient)
Non-operating: 95%, noncondensing @ +30°
<45 dBA @23 °C ± 2°C
0 - 70° C
90-135, 180-265 VAC (40/63 Hz)
Single 125W
13A maximum
3.0A maximum
6.0A maximum
0.2A maximum
100-240VAC input
~0.4A
47-63Hz
Regulated UL Listed Class 2 power supply must be used.
UL 1950, 3rd Edition/CSA 22.2, No. 950M93, 3rd Edition
Low-Voltage Directive, 73/23/EEC TUV/GS to EN60950 2ndEN
60825, Edition with Amendments, A1 = A2 + A3 + A4
CB Certificate and Report to IEC 950, 3rd Edition including
EMKO-TSE (74-SEC) 207/94 and other national deviations
Specifications
Aurorean Installation & Service Guide
Appendix A