Chapter 3
Installing Software & Setting Networking Configurables
The optional Backup Configuration option of the Aurorean Policy Manager
lets you save your just-completed ANG configuration to a local/network site
or a floppy disk. The configuration file created by this backup process is
compressed in a WinZip file as a Unix tar file (config.gz) which bundles
the auser.irx, group.irx and config.irx files.
Perform the steps below to back up the configuration.
Aurorean Installation & Service Guide
1
Click on the General main menu option.
The Backup Configuration button appears as shown in the lower
right corner of Figure 87.
Figure 87 Backup Configuration Button
2
Click Backup Configuration.
A message appears noting the configuration was saved.
Backing Up the ANG Configuration