Configuring The Ang-1000 With Aurorean Policy Manager; Logging Into The Apm; Viewing Vpn Status; Setting Up The Vpn - Enterasys ANG-1000 Installation & Service Manual

Chapter 3
Installing Software & Setting Networking Configurables
To configure the ANG-1000, use the Internet browser on your computer and
connect to the server via the Web. During the Web session, you run
Enterasys's Aurorean Policy Manager (APM) utility and configure the
system. Figure 26 illustrates the process.
ANG-1000 configuration is organized by the following categories:
Aurorean Installation & Service Guide

Configuring the ANG-1000 with Aurorean Policy Manager

Aurorean
Network
Gateway
Remotely Control
Tunnel Server Desktop
Figure 72 Configuring the ANG-1000 via Aurorean Policy Manager
r Logging into the APM
r Viewing VPN Status
r Setting Up the VPN
r Setting Up the Internet Connection
r Setting Up the LAN
r Setting Up the Firewall
r Setting Your Password
r Updating the Firmware
r Checking Device Status
r Using Advanced Utilities
r Using the Configuration Editor
Aurorean
Policy
Manager
PC Desktop