Enterasys ANG-1000 Installation & Service Manual page 125
Aurorean policy server; aurorean policy gateway
Hide thumbs
Also See for ANG-1000:
- User manual (70 pages) ,
- Release note (3 pages) ,
- Installation & service manual (143 pages)
Table of Contents
Advertisement
Chapter 3
Installing Software & Setting Networking Configurables
When a new firmware image becomes available, you can download it easily
to the ANG-1000's flash memory by accessing the FTP server where they are
stored.
Begin updating your firmware by performing the following steps:
Aurorean Installation & Service Guide
Configuring the ANG-1000 with Aurorean Policy Manager
1
Click the Firmware Upgrade menu option.
The Firmware Upgrade window appears as shown in Figure 80.
Figure 80 Firmware Update Window
2
In the FTP server field, enter the name of the FTP server where the
new ANG image is stored: ang.enterasys.com.
3
Type the full path of the location of the Firmware image:
/ang1000/ANG1000.bin
4
Enter the Username anonymous
5
Enter a Password and Confirm the password in the fields provided.
6
Click Apply.
Advertisement
Table of Contents
