Install New Ang System Software - Enterasys ANG-1000 Installation & Service Manual

Installing New System Software on the ANG-3000/7000
Begin by connecting the Aurorean Network Gateway and remote control PC
(laptop or desktop) via a hub or crossover cable (provided in the installation
box) as illustrated in Figure 25. To install new ANG system software perform
the following steps:
Aurorean System
Software CD ROM
r Transfer the ANG installation file to the ANG via FTP
r Install new ANG system software
r Verify the ANG's date/time and update if necessary
r Reboot the ANG to enable the upgrade
Aurorean Network Gateway-3000/7000
Connection
Hub
with no hub
Use Crossover
cable
System
Software
Figure 25 Installing Aurorean Network Gateway System Software
1 Be sure the Aurorean System Software CD ROM is inserted in your
remote control computer's CD ROM drive.
Installing Software & Setting Networking Configurables
FTP
Remote Control PC
FTP
Session
PC Desktop
Aurorean Installation & Service Guide
Chapter 3