Setting User Parameters - Enterasys ANG-1000 Installation & Service Manual

Configuring the Remote ANG-3000/7000 with APM

Setting User Parameters

Users on remote ANGs can be either the name chosen for a corresponding
site-to-site ANG or administrators who require access to the Aurorean Policy
Manager tool. To set User parameters on the ANG, perform the following
steps:
The default user netadmin is included by default for Aurorean Policy
Manager and RiverMaster access. It is included in the default IRAdmin group.
1 Click on the Authentication main menu option.
The Users configuration window appears as shown in Figure 66.
Figure 66 Aurorean Policy Manager Users Authentication Configuration Window
2 Click Add User.
The Add User configuration window appears as shown in Figure 67.
Installing Software & Setting Networking Configurables
Aurorean Installation & Service Guide
Chapter 3