Configuring General Values Of The Ang-3000/7000 With Apm; Installing The Indus River Certificate - Enterasys ANG-1000 Installation & Service Manual

Configuring General Values of the ANG-3000/7000 with APM

To configure general parameters on the ANG-3000/7000, you must use an
Internet browser on your remote control computer and connect via a hub or
the provided crossover cable to the Network Gateway. You run Enterasys's
Aurorean Policy Manager (APM) utility and configure the system. Figure 26
illustrates the process.
This section describes how to use Aurorean Policy Manager to configure the
general parameters of the ANG. The process is organized by the following
categories:
ANG-3000/7000
Figure 26 Configuring the ANG via Aurorean Policy Manager
r Installing the Indus River Certificate.
r Accessing Aurorean Policy Manager from your PC.
r Configuring values such as your VPN, Domain and Host Names,
trusted and external IP addresses and subnets, and local or remote
ANG.
We strongly recommend that you follow the configuration sequence as
described in the following pages. Designed for ease of use and straight-
forward utility, the Aurorean Policy Manager application builds the ANG
configuration in a systematic manner which complements its usability.
Installing Software & Setting Networking Configurables
Remotely Control
Connection
with no hub Network Gateway Desktop
Use Crossover
cable
Hub
Web Utility
PC Desktop
Aurorean Installation & Service Guide
Chapter 3