Configuring Traffic Classes
IEEE 802.1p defines up to 8 separate traffic classes. This switch supports
Quality of Service (QoS) by using two priority queues, with strict priority
queuing for each port. You can use the 802.1P Configuration menu to
configure the default priority for each port, or to display the mapping for
the traffic classes as described in the following sections. Also, refer to
Appendix C, "Class of Service" on page 101.
Use <TAB> or arrow keys to move. <Enter> to select.
9033820-03
Vertical Horizon Stack Local Management
802.1P Configuration
802.1P Port Priority Configuration ...
802.1P Port Traffic Class Information ...
Figure 2-42. 802.1P Configuration
<OK>
VH-2402S2 User Interface 55