Displaying System Information - Enterasys Vertical Horizon VH-2402S2 Configuration Manual

Displaying System Information

Use the System Information screen to display descriptive information
about the switch, or for quick system identification as shown in the
following figure and table.
System Description : Vertical Horizon Stack
System Object ID
System Up Time
System Name
System Contact
System Location
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
System Description
System Object ID
System Up Time
*
System Name
*
System Contact
System Location
*
Maximum string length is 255, but the screen only displays 45 characters. You
can use the arrow keys to browse the whole string.
12 VH-2402S2 User Interface
Vertical Horizon Stack Local Management
System Information
: 1.3.6.1.4.1.5624.2.1.46
: 702567 (0 day 1 hr 57 min 5 sec)
: DEFAULT SYSTEM NAME
: DEFAULT SYSTEM CONTACT
: DEFAULT SYSTEM LOCATION
<APPLY>
Figure 2-4. System Information
Description
System hardware description.
MIB II object identifier for switch's network management
subsystem.
Length of time the current management agent has been
running. (Note that the first value is 1/100 seconds.)
Name assigned to the switch system.
Contact person for the system.
Specifies the area or location where the system resides.
*
<OK> <CANCEL>
VH-2402S2