System Information Menu - Enterasys Vertical Horizon VH-2402S2 Configuration Manual

Selection
Network Monitor Menu
Port Statistics
RMON Statistics
Unicast Address Table
IP Multicast
Registration Table
Static Unicast Address
Table Configuration
System Restart
Exit

System Information Menu

Use the System Information Menu to display a basic description of the
switch, including contact information, and hardware/firmware versions.
Selection
System Information
Switch Information
Stacking Information
9033820-03
Description
Displays statistics on network traffic passing through the
selected port.
Displays detailed statistical information for the selected port
such as packet type and frame size counters.
Provides full address listing, as well as search and clear
functions.
Displays all the multicast groups active on this switch,
including multicast IP addresses and corresponding VLAN
IDs.
Used to manually configure host MAC addresses in the
unicast table.
Restarts system with options to use POST, or to retain
factory defaults, IP settings, or user authentication settings.
Exits the configuration program.
Vertical Horizon Stack Local Management
System Information Menu
System Information ...
Switch Information ...
Stacking Information ...
Use <TAB> or arrow keys to move. <Enter> to select.
Figure 2-3. System Information Menu
Description
Provides basic system description, including contact
information.
Shows hardware/firmware version numbers, power status, and
expansion modules used in the stack.
Shows the status of closed-loop stacking.
<OK>
VH-2402S2 User Interface 11