Enterasys Vertical Horizon VH-2402S2 Configuration Manual page 38

Selection
Global VLAN
Configuration
Port Assignment
VLAN Configuration
Egress Ports VLAN
Configuration
VLAN Forbidden
Ports Configuration
802.1Q VLAN
Base Information
802.1Q VLAN
Current Table
Information
802.1Q VLAN Static
Table Configuration
802.1P Configuration Configures default port priorities and queue assignments.
IGMP Configuration
IGMP Member Port
Configuration
Multicast Router Port
Configuration
* Not implemented in the current firmware release.
30 VH-2402S2 User Interface
Description
Displays basic VLAN information, such as VLAN version number
and maximum VLANs supported, and allows you to enable/
disable each VLAN.
Displays/configures port-specific VLAN settings, including PVID,
ingress filtering, and 802.1Q trunks.
Configures VLAN groups via static assignments to individual
ports or a range of ports, including setting ports as members and
configuring them as untagged.
Restricts individual ports or a range of ports from being
dynamically added to a VLAN by the GVRP* protocol.
Displays basic VLAN information, such as VLAN version number
and maximum VLANs supported.
Displays VLAN groups and port members.
Configures VLAN groups via static assignments, including setting
port members, or restricting ports from being dynamically added
to a port by the GVRP* protocol.
Configures IGMP multicast filtering.
Assigns ports that are attached to hosts who want to receive a
specific multicast service.
Displays the ports on the switch attached to a neighboring
multicast router/switch for each VLAN ID.
VH-2402S2