Revision History - Vidicode V-Tap Manual

11 Revision History

V4.21 May/June/August/September 2021
•
The "Tunnel Server Address" can now hold two addresses.
•
The login "User Name" is now called "Username".
•
V-Archive installation does not need the V-Tap to be connected.
V4.20 November/December 2020
•
Settings page is much smaller! Removed settings are now in 'Special Settings'.
V4.14 May/Juli/August 2020
•
Introduction changed, added "Format SD card" and improved some text.
V4.13 February 2020
•
Changed scheme in 2.1 and added text about USB for V-Archive installation.
V4.12 December 2019
•
New chapter in Button function: "Copy Settings from SD card".
V4.11 October 2019
•
Picture of Audio Input/Output connector replaced.
V4.10 October 2019
•
Improved some text in General network settings.
V4.9 October 2019
•
Access description has changed because DHCP is default enabled now.
V4.8 September 2019
•
Help function in web settings added and text improvements.
v4.7 August 2019
•
USB information added and text improvements.
v4.6 April 2019
•
Changed settings text "Device Name" and "Device IP Address".
v4.5 March 2019
•
Replaced software name "Call Recorder VoIP" by "V-Archive".
v4.4 December 2018
•
Picture in
v4.3 November 2018
•
New chapter:
•
Picture in
v4.2 September 2018
•
First release.
V-Tap Analog 2 Manual EN v4.21 Sept 2021 © 2018-2021 Vidicode
Audio connection added.
Checklist for Tunnel
Apresa install replaced.
connection.
49