Table of Contents
Advertisement
3.3.5
The internal web server can be accessed by entering the address of the
V-Tap in the address bar of any browser. See also
The V-Tap also has a build in FTP (File Transfer Protocol) server that
allows you to access the internal filing system. At this moment, this is
only used for updating the firmware remotely; see
FTP is disabled by entering ".FP0" in
Login Username
Username to log in to the Web settings page and FTP.
The username can be maximum 31 characters long. The single and
double quotation marks (' and ") cannot be used !
The default username is "admin".
Login Password
Password to log in to the Web settings page and FTP and Telnet.
The password can be maximum 31 characters long. The single and
double quotation marks (' and ") cannot be used !
The default password is "admin".
V-Tap Analog 2 Manual EN v4.21 Sept 2021 © 2018-2021 Vidicode
Login settings for Web access & FTP
Access & IP
Firmware
Special Settings &
Address.
update.
Commands.
20
Advertisement
Table of Contents
Need help?
Do you have a question about the V-Tap and is the answer not in the manual?
Questions and answers