Special Sd Card Settings - Vidicode V-Tap Manual

Hide thumbs Also See for V-Tap:

Table of Contents

6.1 Special SD card settings

Next follows a description of some settings for the SD card, which must

be entered in

Special Settings &

SD = Show free space on the card after each reboot

Enter "SD" as the first command in "Special Settings & Commands".

After each reboot and login, free space on the card is shown then.

(A reboot is also done after pressing the 'Save & Logout' button.)

.SR = Remove files from the card after sending

Normally, the files are kept on SD card and are not deleted by the

system, except when the maximum number of files is reached, in

which case the oldest files are overwritten automatically.

It is an option to delete the files after the content was sent to a

Tunnel server. A certain risk is taken then, because data cannot be

recovered anymore after deletion.

.SA = Disable Auto Delete when the card is almost full

When the card is almost full, the oldest files are deleted

automatically by the system to create space. This process can be

disabled, but new recordings will get lost in that case.

When disabled, the user must replace the card on time.

.FY = Enable encryption of WAV files on the card

By default, the WAV files on the SD card can be played by any media

player. By enabling the file encryption, the files only produce noise.

The file encryption uses the same Encryption Password as the Tunnel

encryption.

Commands.

Table of Contents