Vertiv Liebert EDGE Installer/User Manual page 24

Liebert® EDGE Installer/User Guide
Input brownout count
The number of times that the input voltage was too low to support the load and the UPS was
forced to switch to battery power (brown out) Resets to 0 when the UPS is powered down.
Battery Status Options
Battery status
Current battery state: charging, discharging, or fully-charged
Battery voltage (V)
Voltage of battery power
Battery current (A)
Current of battery power
Backup time (Min)
Amount of back-up time remaining for battery
Remaining capacity (%)
Percent of capacity remaining for battery
Discharge count
Number of discharges for the battery module
Total discharge time (Min)
Number of minutes until battery is fully discharged
Battery running time (Day)
Number of days the batteries have been in operation
Battery replacement time
Date of last time battery was replaced
External battery cabinets (2U and 3U VRLA models only)
Number of external battery cabinets connected
Output Status Options
L-N voltage (V)
Line-neutral voltage of output power
L-N Current (A)
Line-neutral current of output power
Frequency (Hz)
Frequency of output power
20
4 Operations