Vertiv Liebert EDGE Installer/User Manual page 13

ITEM DESCRIPTION
1 Connect the two halves of the stand together.
2 Place the UPS in the stands.
3 Make sure that the stands are installed 70 mm from the edge of the unit.
Figure 3.2 Attaching stands to the UPS and external battery
ITEM DESCRIPTION
Connect the two halves of the stand to the spacer, after installing the additional stand components shown in item 4, and
1
install the securing screws.
2 Place the UPS and external battery pack in the stands.
3 Make sure that the stands are installed 70 mm from the edge of the unit.
4 Insert the stand expansion components and install the securing screws.
3 Installation
Liebert® EDGE Installer/User Guide
9