Set Up A Onemesh Network - TP-Link Archer MR600 User Manual

Chapter 14
14 1

Set Up a OneMesh Network

TP-Link OneMesh extender will automatically join the router's OneMesh network
once connected. Check on the router's web management page to see if the OneMesh
network is well-configured.
• If the extender is connected to this router:
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set
for the router.
2. Go to Basic > OneMesh
3. When an extender joins the OneMesh network, it will be listed in the
OneMesh Network
Devices list and click
Now your router and extenders successfully form one OneMesh network!
Tips:
It is recommended to enable
between dual-band networks. With Smart Connect enabled, the router's 2.4GHz and 5GHz share the same SSID
(network name) and password.
• If the extender is not connected to this router
1. Connect one or more OneMesh extenders to this router by following the setup
instructions in the extenders' manuals.
Note:
To check full list of TP-Link OneMesh extenders or other devices, visit https://www.tp-link.com/onemesh/compatibility.
2. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set
for the router.
3. Go to Basic > OneMesh
Tips:
It is recommended to enable
between dual-band networks. With Smart Connect enabled, the router's 2.4GHz and 5GHz share the same SSID
(network name) and password.
or Advanced > OneMesh.
list. Otherwise, you need to find it in the
Add to add it to the OneMesh network.
Smart Connect feature on Wireless
or Advanced >
Smart Connect feature on Wireless
OneMesh with Seamless Roaming
> Wireless Settings
OneMesh to check the devices list.
> Wireless Settings
Devices in
Available OneMesh
to enjoy a seamless connection
to enjoy a seamless connection
93