Chapter 14
4. You can enable
Night Mode
be off during this period.
5. Click Save.
14 3
Test the Network Connectivity
Diagnostics is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
3. Enter the information with the help of page tips:
1 ) Choose
Ping
•
Ping
is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
•
Traceroute
is used to display the route (path) your router has passed to reach
the tested host, and measure transit delays of packets across an Internet
Protocol network.
if needed, and set a time period, and then the LEDs will
System Tools
> Diagnostics.
or
Traceroute
as the diagnostic tool to test the connectivity;
Manage the Router
81