Mounting The Engine; Engine Mount Installation - Seagull Models SEA232 Assembly Manual

Maule SUPER ROCKET
Fuel pick up tube.
9) Connect the lines from the tank to the en-
gine and mu er.
to the mu er and the line from the clunk to
the carburetor.
Blow through one of the lines to ensure
the fuel lines have not become kinked inside
the fuel tank compartment. Air should ow
through easily.

ENGINE MOUNT INSTALLATION.

1) Locate the items necessary to install
the engine mount included with your
model.
2) Use four 4x30mm head bolts and four
4mm washers to attach the engine mount
rails to the rewall. Tighten the screws .
Make sure to use threadlock on the screws to
help prevent them from vibrating loose.
10
Vent tube.
Fuel ll tube.
e vent line will connect
4x30mm
Instruction Manual.
read locker glue.

MOUNTING THE ENGINE.

1) Position the engine with the drive
washer (145mm) forward of the rewall
as shown.
145mm
2) Use a pin drill and 4mm drill bit to
drill a small indentation in the mount for
the engine mounting screw.
4mm
3) Use a drill to drill the four holes in the
engine mount rails.