Table of Contents
Advertisement
Battery.
INSTALLING THE SPINNER.
Install the spinner backplate, propeller
and spinner cone.
e propeller should not touch any
part of the spinner cone. If it does, use a
sharp modeling knife and carefully trim
away the spinner cone where the propel-
ler comes in contact with it.
INSTALLING THE AILERON SERVOS.
£
!
¨
Because the size of servos di er, you
may need to adjust the size of the precut
opening in the mount.
sides of the mount allow the servo lead to
pass through.
1) Using a small weight (Weighted fuel
pick-up works well) and string, feed the
string through the wing as indicated.
Small weight.
2) Place the servo between the mounting
blocks and space it from the hatch. Use a
pencil to mark the mounting hole loca-
tions on the blocks.
"
#
$
£
%
&
¥
¨
'
&
£
#
(
e notch in the
String.
15
Advertisement
Table of Contents
