Table of Contents
Advertisement
2) Install the mu er and mu er extension
onto the engine and make the cutout in the
cowl for mu er clearance. Connect the fuel
and pressure lines to the carburetor, mu er
and fuel ller valve. Secure the cowl to fuse-
lage using the M3x10mm screws.
ELECTRIC POWER CONVERSION.
1) Locate the items neccessary to install
the electric power conversion included
with your model.
2) Recommend the items necessary to in-
stall the electric power conversion parts
included with your model.
- Motor: 50mm 310-500 kV
- Propeller: 14x10 ~ 15x10
- ESC: 60A
- Lipo Batteries: 5-6 cell 4000-5000mAh
3) Attach the electric motor box to the
rewall suitable with the cross lines
drawn on the electric motor box and
rewall. Using epoxy and balsa stick
to secure the motor box to the rewall.
Please see pictures below.
M4x20mm
4) Attach the motor to the front of the
electric motor box using four 4mm blind
nut, four M3x12mm hex head bolts to se-
cure the motor. Please see picture shown.
13
Advertisement
Table of Contents
