Table of Contents
Advertisement
Maule SUPER ROCKET
INSTALLING THE RECEIVER SWITCH.
Install the switch into the precut hole in
the side, in the fuselage.
INSTALLING THE ENGINE SWITCH.
8
3/32" Hole.
Trim and cut.
Switch.
Trim and cut.
Instruction Manual.
Switch.
INSTALLING THE STOPPER
ASSEMBLY.
1) Using a modeling knife, carefully cut
o the rear portion of one of the 3 nylon
tubes leaving 1/2" protruding from the
rear of the stopper.
pick up tube.
2) Using a modeling knife, cut one length
of silicon fuel line. Connect one end of
the line to the weighted fuel pick up and
the other end to the nylon pick up tube.
A
is will be the fuel
B
Advertisement
Table of Contents
