Nexcom CE-HW-01 User Manual page 63

Chapter 4: BIOS Setup
AMT Configuration
This section is used to configure AMT settings.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main
Advanced Chipset PCIPnP
Intel AMT [Enabled]
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Intel ® AMT
Enables or disables Intel Active Management Technology.
®
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
Exit
Security
Enable/Disable Intel (R)
Active Management Technology
BIOS Extension.
Note : iAMT H/W is always
enabled.
This option just controls the
BIOS extension execution.
If enabled, this requires
additional firmware in the SPI
device
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
USB Configuration
This section is used to configure the USB.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced
USB Configuration
USB Module Version
USB Devices:
1 Keyboard, 1 Mouse, 1 Point, 1 Hub
Legacy USB Support
XHCI Hand-off
EHCI Hand-off
USB hardware delays and time-outs:
Device reset time-out
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Legacy USB Support
Enabled Enables Legacy USB.
Auto Disables support for Legacy when no USB devices are connected.
Disabled Keeps USB devices available only for EFI applications.
XHCI Hand-off and EHCI Hand-off
This is a workaround for OSs that does not support XHCI hand-off and EHCI
hand-off. The XHCI and EHCI ownership change should be claimed by the
XHCI and EHCI driver respectively.
Device Reset Time-out
Selects the USB mass storage device's start unit command timeout.
49
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
8.10.33
connected. DISABLE option will
keep USB devices available
only for EFI applications.
[Enabled]
[Enabled]
[Enabled]
[20 sec]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
CE-HW-01/02 User Manual