Brave MVH1334C Owner/Operator And Safety Manual page 3

❏ Read all assembly, operating, and safety instructions.
❏ Complete and return the warranty card to register your log
splitter.
❏ Write the serial number and date-of-purchase in this manual.
❏ Assemble the log splitter.
❏ Make sure the oil filter is properly installed. (See "Assembly
Procedure" section).
❏ Fill the hydraulic tank with the recommended type and quantity
of oil. (See "Start-Up Procedure" section).
❏ Fill the engine crankcase with the manufacturer's
recommended type and quantity of oil. (See "Start-Up
Procedure" section).
❏ Fill the engine fuel tank with fresh, clean, lead-free gasoline.
(Do not mix oil with gasoline).
❏ Bleed the air out of the cylinder before starting the log splitter.
(See "Start-Up Procedure" section).
❏ Make sure the trailer hitch of the towing vehicle is equipped with
a 2 inch ball.
NOTE: Brave reserves the right to make technical changes for product improvement.
This manual may contain illustrations and photographs, for demonstration
purposes, which slightly deviate from the actual product design.
Serial Number
Date-of-Purchase
Please enter the serial number and purchase
date of your log splitter in the space provided.
Keep this manual for future reference.
800-350-8739
Initial Start-up Instructions
1
Brave