Table of Contents
Advertisement
Operation – Vertical Position
5. Use the following photos for the correct
and incorrect methods of splitting logs.
Never split a log using an incorrect or
unsafe method.
a. To operate the log splitter in a vertical
position, pull the spring-loaded locking
lever and twist it in either direction to
lock it in the "unlocked" position.
NOTE: Before raising the log splitter into a
vertical position, make sure the locking lever,
located by the hydraulic tank, is in the
unlocked
position.
recommendation may result in damage to the
plunger.
b. Block the wheels and stand the rail
assembly up into a vertical position.
c. Turn the knob handle until the pin
slides into the slot.
plunger to snap into place, securing
the rail assembly in a vertical position.
800-350-8739
WARNING
Before loading and operating the log splitter,
put on the proper protective gear such as
safety
protection,
drawstrings or loose cuffs), and steel-toed
shoes.
Not
following
This allows the
goggles,
tight-fitting
this
25
face
shield,
gloves
Brave
hearing
(without
Advertisement
Table of Contents
