Table of Contents
Advertisement
d. Move the log under the splitting
wedge, keeping your hands on the
sides of the log near the middle of the
block. Center the log making sure that
the sawed end is sitting on the large
plate (base plate).
Make sure you stand clear from the
engine's exhaust.
intense and can cause serious injury.
Do not place your hands on top
of the log when loading the log
splitter. This is a very UNSAFE
method and could result in injury to your
hands.
If you find you must hold the log
until the splitting wedge touches
it and holds it in place, be very
careful not to put your hand on top of the
log. If you must, hold the log in the middle
of
the
block.
immediately when the splitting wedge
engages the log.
any extension device to operate the valve
control handle.
e. Only using your hand, push the control
lever down (towards the log). If the log
moves before it is contacted by the
splitting wedge, release the control
lever and then reposition the log.
Operate the log splitter only when
standing in the safe operating area,
as shown in the picture.
Brave
CAUTION
Hot exhaust is
CAUTION
CAUTION
Remove
your
Never use your hip or
hand
26
800-350-8739
Advertisement
Table of Contents
