Table of Contents
Advertisement
Unpacking the Crate
1. Cut the metal banding and remove the top,
sides, ends, and protective plastic cover-
ing of the packing crate. Do not remove
the base unit or the rail assembly from the
bottom pallet at this time.
2. Carefully check the larger components on
the shipping pallet for damage. If the parts
are damaged call Brave at (815) 672-
8861.
3. Cut all the remaining banding straps, open
the cardboard box, and make sure all the
smaller parts have been shipped.
chart
in
the
provides a complete list of all the parts
shipped with your log splitter. If any parts
are missing call Brave at (815)
672-8861.
NOTE: The contents of the cardboard box
contains the hitch assembly, two safety
chains, a safety quick-link, two fenders, valve
handle assembly, oil filter, and rail rest
weldment assembly. Also, included in the box
is a plastic bag of miscellaneous hardware
and a plastic bag with the valve handle, chain
link, clevis pin, and cotter pin.
Brave
"Shipping
List"
The
section
10
800-350-8739
Advertisement
Table of Contents
