Table of Contents
Advertisement
14. Secure the side plate by using a pair of
pliers to slide the retaining clip in place
onto the two pins.
Attach the control lever to the valve spool
using a 1/4" x 1" long clevis pin. Secure
the clevis pin with a cotter pin (bend the
ends of the cotter pin to hold it in place).
15. Attach the high-pressure hose from the
filter assembly to the top valve fitting.
Securely tighten the hose fitting.
NOTE: The high-pressure hose is self-seal-
ing and does not require any type of sealing
material.
Tighten the fitting with a 10 inch
crescent wrench.
16. Attach the other high-pressure hose from
the bottom valve fitting to the pump. Coat
the threads of the fitting with a thread
sealing material and securely tighten the
hose fitting.
17. Remove the oil filter from the plastic
cover and apply a thin coat of oil to the
rubber seal.
filter head, located near the hydraulic
tank. Once the filter makes contact with
the filter head, turn it an additional 3/4
turn. Hand-tighten only.
800-350-8739
Screw the filter onto the
35
Brave
Advertisement
Table of Contents
