Assembly Procedure - Brave MVH1334C Owner/Operator And Safety Manual

Assembly Procedure

CAUTION
Some components are very heavy
and can be damaged if
mishandled. Also, to help
prevent personal injury, it is
strongly recommended that two
(2) people work together to
uncrate and assemble the log
splitter.
NOTE: This manual may contain illustrations
and photographs which slightly deviate from
the actual product design.
1. Remove and read all instructions
and safety recommendations before
assembling or operating this log
splitter.
2. Before removing the base unit from the
pallet, remove the tongue and front leg
assembly.
3. Attach wheeled Jack assembly
a. Place the tongue assembly in a position
that allows installation of the wheeled jack
assembly.
b. Determine which side of the log splitter to
place the jack handle (owner's discretion).
Place the jack assembly with mounting
bracket against the tongue and install two
bolts through the top mounting holes, as
shown. Place the two mounting straps over
the bolts on the opposite side of the tongue
and loosely install the locknuts.
800-350-8739
Back
(Splitting end)
Left Side
11
Front
(Hitch coupler end)
Brave