Brave MVH1334C Owner/Operator And Safety Manual page 15

6. Align the holes in the hinge bracket with
the holes in the rail assembly.
7. Bolt the base unit to the rail assembly
using two 1/2-13 x 1-1/2 inch long hex
head bolts, lockwashers, and nuts, as
shown. Hand tighten the nuts securely.
8. Bolt the rail rest weldment to the rail
assembly using two 1/2-13 x 1-1/2 inch
long hex head bolts, lockwashers, and
nuts, as shown.
securely.
Pull the latch mechanism outward and
rotate the handle to hold the lock pin in the
unlocked position.
9. Place one foot on the base plate of the leg
and carefully lower the rail assembly to a
horizontal position.
NOTE: Block the wheels to prevent the base
unit from moving.
Securely tighten the nuts holding the base
unit to the rail assembly (Step 7) and the nuts
holding the rail rest assembly (Step 8).
800-350-8739
Hand tighten the nuts
13
Back
(Splitting end)
2½
Front
Left
(Hitch coupler end)
Side
Brave