10.
Link the ends of the safety chains
together with the safety quick-link and
tighten the link's locknut securely with a
wrench.
11. Place the hitch over the attachment tube,
aligning the bolt holes, and insert the rear
1/2 x 3-1/2 inch bolt (A). Install and tight-
en the locknut.
Insert the end of the quick-link into the
front tube of the rail assembly and insert
a 1/2 x 3-1/2 inch bolt (B) through link and
hitch. Install and tighten the locknut.
12. Insert the chain link into the valve body,
as shown, with the pins facing upward.
13. Position the control lever, as shown, and
install it onto the chain link pin. Place
the chain link side plate on top of the two
pins.
Brave
14
800-350-8739