Table of Contents
Advertisement
Towing
Maximum Speed Limit — 35 mph
Your log splitter is built on a solid, unsuspended axle. To prevent damage or
possible loss of vehicle control, use extreme caution when towing and do not
exceed a vehicle speed of 35 mph, especially when driving on a bumpy road.
1. Position the hitch coupler of the log splitter
over or onto the tow vehicle's tow ball. In
some cases, the hitch coupler may not
totally engage with the tow ball without
raising the jack leg assembly.
latch assembly on the hitch coupler up and
into the open position.
2. Release the latch assembly on the hitch
coupler and lock the hitch coupler onto the
tow ball.
3. Raise the front leg to the towing position
by pulling the spring pin.
secure, make sure the hitch coupler is
properly and securely attached to the tow
ball.
800-350-8739
WARNING
Pull the
If not already
19
Brave
Advertisement
Table of Contents
