Related Manuals for Quectel FCM360W
Summary of Contents for Quectel FCM360W
- Page 1 FCM360W Wi-Fi Pairing Guide Wi-Fi&Bluetooth Module Series Version：1.0.0 Date：2024-05-27...
-
Page 2: About The Document
About the Document Revision History Version Date Author Description 1.0.0 2024-05-27 Aubrey Li Creation of the document 1 / 6... -
Page 3: Table Of Contents
Contents About the Document ..........................1 Contents ..............................2 Introduction ............................. 3 Wi-Fi Pairing via AP hotspot ......................4 2.1. Environment Setup ........................4 2.2. Wi-Fi Pairing Steps........................4 2.2.1. Enabling AP mode ......................4 2.2.2. Connecting to AP Hotspot ....................4 2.2.3. -
Page 4: Introduction
Introduction This document mainly introduces the Wi-Fi pairing methods of Quectel FC41D module, including Wi-Fi pairing via AP hotspot. 3 / 6... -
Page 5: Wi-Fi Pairing Via Ap Hotspot
2.2. Wi-Fi Pairing Steps 2.2.1. Enabling AP mode Step 1: Press the RESET button on the FCM360W-TE-B to reboot the module. Step 2: After the module is rebooted, execute AT+QSOFTAP=<SSID>[,<key>] to enable the AP mode of the module. For example, execute AT+QSOFTAP=“FCM360W”,“12345678” to set the name of the module AP hotspot to “FCM360W”... -
Page 6: Ebable Wi-Fi Pairing Via Web
Figure 1: Connect to AP Hotspot and check AP Gateway 2.2.3. Ebable Wi-Fi Pairing Via Web Step 1: Execute AT+QWEBCFG=1 to enable Wi-Fi paring via Web. Open the browser on mobile phone or PC and enter “10.10.10.1/setting” in the browser address bar, then Step 2: click “Enter"... - Page 7 Figure 3: Network Connection Setting Step 3: Check the information printed at the UART and the information displayed at the router background management interface to determine if the Wi-Fi pairing is successful. As shown in Figure 4 and Figure 5, it indicates that the Wi-Fi pairing is successful.
Need help?
Do you have a question about the FCM360W and is the answer not in the manual?
Questions and answers