Table of Contents
Advertisement
– 49 –
VALIDATION
The method has been validated according to
DIN EN ISO 17665-1 using:
– Euro-Selectomat 666 from MMM (fractionated pre-vacuum
method)
– Varioklav 400 E from H+P Labortechnik (gravitation method)
5.6 Visual inspection
Inspect all product components after each cleaning, disinfec-
tion and sterilisation. Replace any broken, misshapen or seri-
ously discoloured parts.
5.7 Storage
Store the assembled VORTEX and the accessories used in a
dry, dust-free location equipped with protection against
contamination.
Advertisement
Chapters
Table of Contents
