Visual Inspection; Drying And Storage - Pari Vortex Instructions For Use Manual

Using a standard thermal disinfector for baby
bottles (not a microwave oven)
For effective disinfection, use a disinfector with a runtime of at
least 6 minutes. Regarding disinfection, the duration of the dis-
infection procedure and the quantity of water required for this,
follow the instructions for use of the disinfector you are using.
CAUTION
Inadequate disinfection encourages the growth of bacteria
and thus increases the risk of infection. Thorough disinfec-
tion has not been completed until the disinfector automatic-
ally switches itself off, or the minimum disinfection time spe-
cified in the instructions for use of the disinfector has
elapsed. Therefore, do not switch the device off prematurely.
Also make sure that the disinfector is kept clean and regu-
larly check that it is in good working order.

4.4 Visual inspection

Inspect all product components after each cleaning and disin-
fection. Replace any broken, misshapen or seriously dis-
coloured parts.

4.5 Drying and storage

• Dry all individual parts completely.
Because of the antistatic properties of the inhalation cham-
ber, you can dry them with a clean tea towel.
• Place the protective cap over the mouthpiece.
Info: The protective cap protects the mouthpiece from dam-
age during transport and storage.
• Attach the mouthpiece to the inhalation chamber.
• Store the VORTEX and its accessories in a dry, dust-free
place (safely out of continuous direct sunlight).
– 39 –